Register
Sign in
0
All
Hydranautics Membranes
Reverse Osmosis (RO)
SWC (Sea Water Composite)
CPA (Composite Polyamide)
ESPA (Energy Saving Polyamide)
LFC (Low Fouling Composite)
Nanofiltration (NF)
ESNA
NANO-BW
NANO-SW
HYDRACoRe®
Ultrafiltration (UF) / Microfiltration (MF)
HYDRAcap®
HYDRAcap® MAX
HYDRAsub®
Process Separations
DairyRO
SuPRO
SanRO®
HYDRApro®
DairyNF
LG Membranes
Seawater Reverse Osmosis Membranes
LG SW G2 Membranes
LG SW G1 Membranes
Brackish Water Reverse Osmosis Membranes
High Rejection Anti-fouling
High Rejection Standard
Energy Saving
Ultra Energy Saving
Light Commercial RO Membranes
High Rejection
Low Pressure
Ultra Low Pressure
Aquaporin Membranes
Membrane Accessories
Smart Membrane Solutions
Spiral Wound Membrane Filtration Accessories
Spiral Wound Membrane Removal Toolkit
Pressure Vessels
BEL Pressure vessels
4" Pressure vessels
8" Pressure vessels
Synder Filtration
Industrial Membranes
Industrial NF Membranes
Industrial UF Membranes
Industrial MF Membranes
Sanitary Membranes
Sanitary NF Membranes
Sanitary UF Membranes
Sanitary MF Membranes
Amazon Filters
Filtrations
Elfi Filtration
Self-Cleaning Filters
Reverse Osmosis Systems
Reverse osmosis units
Brackis water reverse osmosis
Ultrafiltration Units
Ultrafiltration units 100-300 m3/day
DCS Ultrafiltration unit 100 m3/day
Ultrafiltration units 30-40 m3/day
DCS Ultrafiltration units 30-40 m3/day
Services
About Us
Aquaporin Membranes
Aquaporin Inside CLEAR Ultra 4040 XL
Aquaporin Inside CLEAR Ultra 4040 XL
In Stock
Get a quote
PRODUCT TYPE
The Aquaporin Inside® CLEAR membrane series are biomimetic products that get their unique properties from their embedded aquaporin proteins, nature’s water channels.
All Aquaporin Inside® CLEAR membranes are available in standard configurations and can easily fit into any commercial or industrial RO system.
PRODUCT SPECIFICATIONS
Product name
Item no.
Element type
Active membrane area
Permeate flow rate
Typical rejection
Minimum rejection
Feed water
Pressure
Aquaporin Inside® CLEAR Ultra 4040
40101
Tape wrap, wet
85 ft² 7.9 m²
2,600 GPD
99.0%
98.0%
500 ppm NaCl
100 psi (6.9 bar)
Aquaporin Inside® CLEAR Ultra 4040XL
40102
Tape wrap, wet
97 ft² 9.0 m²
3,100 GPD
99.0%
98.0%
500 ppm NaCl
100 psi (6.9 bar)
The stated product performances are tested at 25°C (77°F), 15% recovery, pH 7-8. Permeate flow rate and rejections are stated after a minimum of 60 min operation.
Individual element permeate flow rate may vary ± 15%.
ELEMENT DIMENSIONS
Product name
A
B
C
D
Aquaporin Inside® CLEAR Ultra 4040 series
40.0 / 1016.0
1.05 / 26.7
0.75 / 19.1
3.95 / 100.3
Dimensions (inches / millimeters)
OPERATING SPECIFICATIONS
Maximum operating
pressure
20.7 bar (300 psi)
Maximum feed water turbidity
1 NTU
Maximum feed flow rate
3.6 m3/h (16 gpm)
pH range (operation)
3–10
Maximum operating temperature
45°C (113°F)
pH range (short-term cleaning, 25°C / 77°F)
1–12
Maximum pressure drop
0.7 bar (10 psi)
Free chlorine tolerance
< 0.1 ppm
Maximum feed water SDI
5 (15 min)
ADDITIONAL INFORMATION
Permeate from the first hour of operation should be discarded. Do not use this initial permeate for consumption.
To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution. Rinse out the preservative solution before use.
Elements contained in the boxes must be kept dry at room temperature (5–35°C / 41–95°F) and should not be stored in
direct sunlight.
Keep elements moist at all times after initial wetting.
The presence of free chlorine and other oxidizing agents can cause premature membrane failure. Since oxidation damage
is not covered under warranty, Aquaporin A/S recommends removing residual free chlorine by pretreatment prior to
membrane exposure.
The information provided in this document is for informative purposes only. It is the responsibility of the user to ensure
appropriate usage of this product. Aquaporin A/S assumes no obligation, liability, or damages incurred for the misuse of the
product. This document does not express or implies any warranty as to the merchantability or fitness of the products.
aquaporin-inside-clear-ultra-4040-datasheet
Ing. Ivo Vošahlík (C) 2018 - 2022. Všechna práva vyhrazena.